Beadboard and Wallpaper Accent Wall Tutorial

If your looking to start DIYing, adding bead board paneling and wallpaper is a great place to start.

I kept the bead board at the 4 foot height it comes in to make it easy, but home depot can also cut the boards to the sizes you need.

I installed both the board and trim to the wall with some power grab adhesive and number 4 finish nails. I didn’t even use a nail gun for this project. Get a nail setter push the nails into the board prior to filling. Caulk all around for a seamless finish. Make sure to use a caulk that can be painted.

Next up was this affordable and easy to apply peel and stick wallpaper from amazon- it was very forgiving if I needed to unstick and reposition. Check out my wallpaper tutorial!

Painting came next on both the walls and beadboard, and last but not least installing these beautiful towel hooks.

Here are the links to everything I used for this bathroom refresh 😊

Beadboard: EUCATILE 32 sq. ft. 3/16 in. x 48 in. x 96 in. Beadboard White True Bead Panel 975-759 - The Home Depot

Nail setter set: https://a.co/d/fNol5i7

Wood filler: https://a.co/d/fQ7gGIP

Caulk: DAP Kwik Seal 10 oz. White Kitchen and Bath Sealant (2-Pack) 7079818032 - The Home Depot

Adhesive: https://a.co/d/g17HmlZ

Beadboard blue paint: https://www.behr.com/consumer/ColorDetailView/M500-3

Wall Paint white: Chantilly Lace OC-65 | Benjamin Moore

Wallpaper: https://a.co/d/5Gx7YUY

Towel Hooks: https://a.co/d/3nEFK9y